注意:
->Attention:

固件安装路径默认C盘
->The default firmware installation path is drive C
固件安装完成后需要重启电脑
->After the firmware installation is complete, restart the computer
烧录固件时需要使用可以传输数据的USB线，不是普通的充电线
->When burning firmware, you need to use a USB cable that can transfer data, rather than a regular charging cable
连接设备得type-c数据连接口在设备右侧，而不是底部
->The type-c data connection port to connect the device is on the right side of the device, not the bottom